Thank you for viewing our product.
This product is made using a fused deposition modeling (FDM) 3D printer.
It is made from PLA material.
This is an adapter that allows you to attach an M4 stock to a Tokyo Marui SPAS12.
To install, remove the grip mounting bolt on the main body and attach it to the main body using the included bolt.
*Please limit the installation torque to approximately 1-2 N·m.
*The main body is secured with a single bolt, so if it loosens, please retighten the bolt.
Color: Matte Black
Stock tube diameter: Approx. 29mm (Mil-spec compliant)
As this is a 3D printed product, layer lines may be visible.
If this is a concern, you can finish it with sandpaper or other tools.
Regarding Strength:
This product uses PLA material and does not have the same strength as metal products. It may break if excessive force is applied or if it is hit hard.
*Please do not use items such as stabilizer braces or braces that place a strong load on the stock adapter itself.
Set Contents:
- Main body
- M6 x 60mm hex bolt for installation (1 pc)
As this is a 3D printed product, shipping may take some time.
Also, the shape may change depending on the production period due to improvements.
*The firearm body and slide stock are not included.
Daily Cleaning: Use a soft brush or damp cloth to gently wipe away dirt. Avoid harsh chemicals. For mesh areas, use diluted mild detergent and a soft brush.
Drying: Air dry in a cool, shaded place after cleaning. Avoid direct sunlight or high heat, which can cause fading and glue deterioration.
Storage: Stuff with paper to maintain shape when not in use. Store in a dry, ventilated area to prevent mold. Rotate between multiple pairs to extend lifespan.
Usage Notes: Designed for basketball. Not recommended for hiking, long-distance running, or other specialized sports where different performance features are required.
Goede prijs-kwaliteitverhouding. Het artikel is zoals verwacht en functioneert zoals het hoort. Geen problemen ondervonden tijdens het gebruik.