This item was stored at home.
It is new and unopened, but there is tape peeling on a part of the package.
- This is a cable for connecting a computer with a DVI (29-pin or 24-pin) connector to a display with a DVI (29-pin or 24-pin) connector.
- DVI digital (single link mode only).
* Dual link mode and analog mode are not supported.
- The cable has a triple shield structure from the center: aluminum shield -> aluminum shield -> high-density braided shield for even higher shielding performance. (TMDS signal lines only)
- Uses twisted pair wires, where two cores are twisted together, making it resistant to noise. (TMDS signal lines only)
- The connector is resin molded internally and fully shielded externally, providing excellent noise prevention against external interference. It also offers superior vibration and shock resistance.
- Uses gold-plated pins (contacts) that are resistant to rust and less prone to signal degradation due to aging.
- Features ferrite cores at both ends of the cable to absorb high-frequency noise.
Please only purchase if you understand the above points.
Daily Cleaning: Use a soft brush or damp cloth to gently wipe away dirt. Avoid harsh chemicals. For mesh areas, use diluted mild detergent and a soft brush.
Drying: Air dry in a cool, shaded place after cleaning. Avoid direct sunlight or high heat, which can cause fading and glue deterioration.
Storage: Stuff with paper to maintain shape when not in use. Store in a dry, ventilated area to prevent mold. Rotate between multiple pairs to extend lifespan.
Usage Notes: Designed for basketball. Not recommended for hiking, long-distance running, or other specialized sports where different performance features are required.
De kwaliteit is redelijk en het artikel is handig in gebruik. Het voldoet aan de verwachtingen en ik ben er over het algemeen tevreden mee.