For Hiro-san only

Please leave a comment if you have any questions.

Heat , Stepless Temperature Control, 2-Speed Airflow, AC110V, 1400W, 50℃-650℃, Multi-purpose Hot Air , Heat Tool, Includes 1 Scraper, 5 Nozzles, Industrial Hair Dryer, QR85-A2, Double Insulation

[Safe and Secure Japanese Standards] ● PSE certified for safe and secure use in Japan. ● Power: AC110V 50/60Hz compatible, Power Consumption: Max 1400W. *This heat can be used with standard household voltage in Japan. ● Power cord length (cord only): approx. 1.6m (Please note that the length from the heat body to the power plug is approx. 1.8m). *A small amount of white mist may appear when using the heat for the first time, but please rest assured.
[Stepless Temperature Control + 2-Speed Airflow] ● The heat is equipped with both an airflow control switch and a stepless temperature adjustment dial. You can easily control the temperature precisely according to your work. You can switch between high and low airflow modes using the switch. If necessary, you can freely adjust the temperature by turning the stepless temperature adjustment dial. ? Low Airflow Mode I: Airflow 250L/min, Temperature Range 50-300℃. ? High Airflow Mode II: Airflow 500L/min, Temperature Range 50-650℃. *Turn the dial to the left to gradually decrease the temperature. Turn to the right to gradually increase the temperature.
[Includes 6 Accessories] ● A multi-purpose hot air that can be used for various heat treatment processes with powerful hot air. Comes with 5 types of nozzles for various applications such as shrinking heat shrink tubing, adhesive treatment, paint stripping, resin pipe molding, plastic welding, heating heat shrink film, seal removal, circuit board repair, welding, drying, defrosting, and more. ● In addition to the nozzles, a scraper is also included. This can be used for scraping and peeling off materials that have been processed with the hot air , making it easier to work with. This is a very user-friendly hot air with a rich set of accessories.
[Rapid Cooling of Heat ] ● Before finishing your work, switch to high airflow mode, turn the temperature adjustment dial all the way to the left, and wait for 5 minutes to cool down the heat . After the temperature has significantly decreased from the working temperature, turn off the power. Then, store the heat after it has completely cooled down.